Short answer: To size a home solar battery, list the essential loads you want during a power cut, add up their watts, multiply by the backup hours you need to get watt-hours, then divide by the battery's usable depth of discharge and the inverter efficiency. For example, about 630 W of essential loads for 4 hours needs roughly 2.5 kWh of usable energy, which means a battery of around 3 kWh nominal. Size backup to critical circuits, not the whole house.
Step 1: Decide which loads need backup
Backing up an entire home, including air conditioners and geysers, needs a very large and expensive battery. Most Hyderabad homes back up a separate essential-loads circuit:
Refrigerator
Ceiling fans
LED lights
Wi-Fi router and work laptop
TV
Water pump, if the motor rating allows (check starting current)
Step 2: Add up the power (watts)
An illustrative essential-loads list:
Refrigerator: about 150 W average
4 ceiling fans: about 300 W
6 LED lights: about 60 W
Router and laptop: about 20 W (router) plus charging as needed
TV: about 100 W
Total: about 630 W. Check the rating labels on your own appliances; real values vary.
Step 3: Multiply by backup hours
If outages in your area last up to 4 hours: 630 W × 4 h = 2,520 Wh, or about 2.5 kWh of energy needed.
Step 4: Adjust for usable capacity and efficiency
Depth of discharge (DoD): lithium batteries are commonly used to about 80–90% of their nominal capacity; check the datasheet.
Inverter efficiency: some energy is lost converting DC battery power to AC, typically around 90% efficiency or better.
Nominal battery size ≈ energy needed ÷ (DoD × inverter efficiency) = 2.5 ÷ (0.9 × 0.9) ≈ 3.1 kWh
So a battery of around 3 kWh nominal would cover this example. Add a margin if outages are longer or loads may grow.
Step 5: Check the inverter's power rating
Battery size (kWh) sets how long you can run; the hybrid inverter's rating (kW) sets how much you can run at once. Motors and pumps draw a high starting current, so confirm the inverter can handle surges.
Do you need a battery at all?
If your area has few outages and you already have an inverter-battery for lights and fans, an on-grid system may be enough
A battery does not usually improve savings under net metering; it adds backup
Read on-grid vs hybrid solar and using solar with your existing home inverter
Frequently asked questions
How do I calculate battery size for solar backup?
Add the watts of essential loads, multiply by backup hours, then divide by depth of discharge and inverter efficiency to get nominal kWh.
Can a home battery run air conditioners?
It can, but ACs draw a lot of power, so the battery and inverter become much larger and costlier. Most homes back up essential loads only.
What is depth of discharge?
The share of a battery's capacity that can be used safely. Lithium batteries typically allow a higher depth of discharge than lead-acid.
Does a battery increase solar savings?
Under net metering, usually not by much. A battery's main value is backup during power cuts.
Is battery size the same as inverter size?
No. Battery capacity (kWh) decides how long loads run; inverter rating (kW) decides how much load can run at once.
Related guides
Does Solar Work During Power Cuts in Hyderabad? What It Can and Cannot Back Up
Can Rooftop Solar Work With Your Existing Home Inverter and Battery?
Which Solar Panels Are Best for a Hyderabad Home? How to Choose Panels and Inverter
Can I Expand My Existing Solar System in Hyderabad? Capacity, Approvals and Subsidy
Off-Grid Solar for Farmhouses Near Hyderabad: When It Makes Sense
Start here: Hyderabad rooftop solar buyer's guide
Get a backup plan sized to your home
Arkasri Energy designs hybrid solar systems around the circuits you actually need during outages. See hybrid solar and batteries or book a site assessment.
Written by the Arkasri Energy team, Tellapur, Hyderabad. Reviewed November 2026. Figures are illustrative; confirm with appliance labels and battery datasheets.
