Short answer: Lower solar generation usually has a simple cause: seasonal weather (Hyderabad's monsoon months produce less), dust on panels, new shading from a tree or building, an inverter fault or a tripped breaker, or a monitoring app that has lost Wi-Fi rather than an actual drop. Owners can safely compare readings with past months, look for visible dust and shade, and check the inverter display. Opening electrical boxes, working on wiring or climbing unsafe roofs should be left to the installer.

First, is it really a drop?

  • Compare like with like: compare this month with the same month last year, not with April or May

  • Season: July to September in Hyderabad has more cloud and rain, so lower output is normal. See units generated per day in Hyderabad

  • Monitoring gaps: if the app shows zero but the inverter display shows generation, the Wi-Fi logger may simply be offline

  • Bill vs app: the bill shows exports, not total generation. See reading your bill after solar

Safe checks owners can do

  1. Look at the inverter display or lights. Note any fault code or red/orange light and photograph it.

  2. Check the monitoring app for alerts, and whether the logger is connected to Wi-Fi.

  3. Look for visible dust or bird droppings from a safe position. Heavy soiling before the monsoon is common.

  4. Look for new shading from trees, a new water tank, a neighbour's floor or a hoarding.

  5. Check whether the grid was off during the day. On-grid inverters stop when the grid fails.

  6. Check the main board for a tripped solar MCB, without opening any solar boxes.

Cleaning safely

  • Clean early morning or evening when panels are cool

  • Use plain water and a soft brush or mop; no detergents, abrasives or pressure washers

  • Never stand or walk on panels

  • Use walkways and safe access only

See solar maintenance tips.

When to call your installer

  • The inverter shows a fault code or keeps restarting

  • One string or section produces much less than the others

  • A breaker trips again after being reset

  • Burning smell, discoloured panels, cracked glass or damaged cables

  • Output stays low after cleaning and in clear weather

Do not open the DCDB or ACDB yourself; solar DC circuits can carry dangerous voltages even when the grid is off. See solar protection equipment explained.

Frequently asked questions

Why is my solar generating less this month?

Common causes are monsoon weather, dust, new shading, an inverter fault or a monitoring connection problem.

How often should I clean solar panels in Hyderabad?

It depends on dust levels; many homes clean every few weeks in dry months. Check generation after cleaning to see the effect.

Why does my solar app show zero?

Often the Wi-Fi logger is offline. Check the inverter display; if it shows generation, the system is working.

Does solar work during a power cut?

Standard on-grid systems shut down in a grid outage for safety, so generation stops until the grid returns.

Is it safe to reset a tripped solar breaker?

You can reset the solar MCB on your main board once. If it trips again, stop and call your installer.

Related guides

Need a service check?

Arkasri Energy provides inspection and maintenance for rooftop solar systems across Hyderabad. See solar maintenance or contact us.

Written by the Arkasri Energy team, Tellapur, Hyderabad. Reviewed November 2026. For safety, leave electrical work to qualified technicians.