Short answer: In Hyderabad, which lies at about 17.4° north, fixed rooftop solar panels generally produce the most energy over a year when they face south with a tilt in the mid-teens of degrees, roughly close to the city's latitude. Small changes in tilt make only a modest difference to annual output, so installers often adjust it for wind load, row spacing, self-cleaning and roof space. East-west layouts produce somewhat less per panel but can fit more panels on a small roof.
Which direction should solar panels face in India?
In India, which lies north of the equator, solar panels should face true south. South-east or south-west costs only a few percent of yearly output; east-west layouts lose more but can fit more panels on a crowded roof. Tilt the panels at roughly your latitude — about 15–18° in Hyderabad, 12–13° in Chennai and Bengaluru, 19° in Mumbai, 22–23° in Kolkata and 28° in Delhi. A slightly flatter tilt is fine on rooftops and reduces wind load.
Direction: why south
Hyderabad is in the northern hemisphere, so the sun is in the southern sky for most of the year
South-facing panels capture the most sunlight over the year
South-east or south-west orientations lose a little output but can work well
North-facing panels should be avoided on flat roofs
Tilt: the latitude rule and its limits
A common starting point is a tilt close to the site's latitude. For Hyderabad, that suggests a tilt in the mid-teens of degrees. In practice:
Slightly lower tilt: less wind load, shorter shadows, closer rows, more panels on the roof
Slightly higher tilt: better self-cleaning in rain and a little more winter output
Very low tilt (under about 10°): dust and water collect, so cleaning is needed more often. See solar panel cleaning in Hyderabad
The installer's design software can model the exact effect for your roof.
East-west layouts
Panels face east and west in pairs at a low tilt
Less output per panel, but more panels fit on a small roof
Generation spreads across morning and evening, which can match household use
Often paired with a higher DC/AC ratio. See kW vs kWp
Row spacing and shading
Higher tilt means longer shadows, so rows need more spacing
Winter mornings and evenings cast the longest shadows
Parapets, water tanks and staircase rooms also need to be considered. See what a site survey checks
Elevated and sheet roofs
Elevated structures need careful wind design at any tilt. See elevated structures
On metal sheet roofs, panels are often fixed at the roof's own slope to reduce wind load
Frequently asked questions
Which direction should solar panels face in Hyderabad?
South, for the highest annual output on a fixed system.
What is the best tilt angle for solar panels in Hyderabad?
Around the mid-teens of degrees, close to the city's latitude of about 17°, adjusted for wind, spacing and cleaning.
Is an east-west layout good for Hyderabad?
It produces less per panel but can fit more panels on a small roof and spreads generation through the day.
Should I adjust the tilt seasonally?
Rooftop systems are usually fixed. The small seasonal gain rarely justifies adjustable structures on homes.
Does tilt affect how often panels need cleaning?
Yes. Very flat panels collect more dust and water, so they need cleaning more often.
Related guides
Will Solar Work on a Shaded Rooftop in Hyderabad? Layout, Optimisers and Trade-offs
Solar Generation in Hyderabad Through the Year: Summer, Monsoon and Winter
Solar Panel Cleaning in Hyderabad: How Often and How to Do It Safely
Rooftop Solar Installation Quality Checklist for Hyderabad Homes and Businesses
Start here: Hyderabad rooftop solar buyer's guide
Get a layout designed for your roof
Arkasri Energy designs panel layouts for Hyderabad roofs, balancing output, wind safety and terrace use. See rooftop solar for homes or book a site assessment.
Written by the Arkasri Energy team, Tellapur, Hyderabad. Reviewed November 2026.
