Short answer: Solar payback is the number of years it takes for your bill savings to equal what you paid for the system. Savings do not equal generation × tariff. In Telangana, units you use directly save your full slab tariff, units you export are settled at a much lower rate if you end up in surplus, and fixed charges stay the same. So payback is fastest when the system is sized to your own consumption and most solar is used during the day.

The simple formula and why it misleads

The common shortcut is:

Payback = system cost ÷ (annual units generated × tariff)

This overstates savings because it assumes every unit generated is worth your highest tariff. In practice, your savings come from three different places, each worth a different amount.

Where solar savings actually come from

  • Used directly in your home or business — What happens: Never touch the meter; Value to you: Saves the tariff you would have paid, often your highest slab

  • Exported and offset against imports — What happens: Net metering credits them against grid units; Value to you: Saves the tariff on the offset units

  • Surplus at settlement (exports exceed imports) — What happens: Settled by the DISCOM; Value to you: Paid at the lowest discovered solar tariff, well below retail

Under the TGERC rooftop solar regulation in force since 15 November 2025, surplus energy is settled at the lowest solar tariff discovered by Telangana DISCOMs in the previous financial year. See net metering in Telangana.

What else affects payback

  • Fixed and customer charges do not fall with solar. See how to read your electricity bill after solar.

  • Slab effects: reducing net units can move a home to a lower slab, which changes the value of each unit saved.

  • Subsidy: for eligible homes, the PM Surya Ghar subsidy reduces the net cost, but it is paid after commissioning. See the PM Surya Ghar guide.

  • Loan interest: if the system is financed, interest increases the total cost.

  • Maintenance: cleaning, inspections and a possible inverter replacement during the system's life.

  • Performance: dust, shading and panel degradation reduce output over time.

  • Tariff changes: if grid tariffs rise, savings rise too, but future tariffs are uncertain.

How to estimate your payback honestly

  1. Start with 12 months of bills to know your annual units and slab pattern.

  2. Estimate generation for the proposed size. See how many units solar generates in Hyderabad.

  3. Estimate the self-use share: how much of the generation happens while you are using power.

  4. Value self-used and offset units at your tariff, and any surplus at the settlement rate.

  5. Subtract unchanged fixed charges from the savings calculation.

  6. Use the net cost: price after any subsidy, plus loan interest if financed, plus expected maintenance.

  7. Divide net cost by realistic annual savings.

Our guide on how solar generation and savings are estimated explains each assumption.

How to shorten your payback

  • Size the system to your consumption, not your roof

  • Move flexible loads (pumps, washing machines, water heating, EV charging) to 10 am–3 pm

  • Keep panels clean and check the monitoring app monthly

  • Compare quotes on full scope, not headline price. See how to compare two solar quotations

EMI vs electricity bill: compare them separately

If you finance solar with a loan, your monthly outflow becomes EMI + remaining electricity bill. Compare that total with your current bill. A system can still be worthwhile if the EMI is higher than the savings for a few years, but you should see the numbers separately rather than as a single "you save ₹X" figure.

Frequently asked questions

What is a good solar payback period?

It depends on your tariff, self-use and system cost. Ask your installer to show the assumptions so you can check the estimate yourself.

Why is my solar saving less than expected?

Common reasons are low daytime self-use, surplus exports at a low rate, unchanged fixed charges, dirty panels or new shading.

Does a bigger system pay back faster?

Not beyond your own consumption. Extra units exported at settlement earn a low rate, which slows payback.

Does the subsidy reduce payback?

Yes, for eligible homes, because it lowers the net cost. It is paid after commissioning, so plan for the full cost upfront.

How do I calculate solar payback?

Divide the net system cost by realistic annual savings, valuing self-used units at your tariff and any surplus at the settlement rate.

Related guides

Get an honest savings estimate

Arkasri Energy estimates savings from your actual bills and usage pattern, and shows the assumptions behind every number. Try the home solar calculator, see rooftop solar for homes, or book a site assessment.

Written by the Arkasri Energy team, Tellapur, Hyderabad. Reviewed November 2026. Estimates are illustrative; confirm tariffs and subsidy rules with TGSPDCL and the official portal.