Short answer: If your Hyderabad house has separate meters for each floor, you have three options: connect solar to one meter (usually the owner's floor), install separate smaller systems for each meter, or use group net metering, which Telangana's 2025 rooftop regulation allows for systems from 10 kWp to below 100 kWp to share output across the same consumer's connections. The right choice depends on who holds each connection, each floor's sanctioned load and how much roof space is available.
Why multi-meter houses are common
Many independent houses in Hyderabad have rented floors, each with its own TGSPDCL service connection, plus a common meter for the motor and stair lights. The roof is shared, but bills are separate.
Option 1: Solar on one meter
Simplest: one system on the owner's connection
Size limited by that meter's sanctioned load. See sanctioned load and solar capacity
Other floors do not benefit directly
Option 2: Separate systems per meter
Each floor gets its own panels, inverter and net meter
Roof space must be divided fairly
More equipment and paperwork, but clear ownership
Option 3: Group net metering
One system on the roof; output is credited across several connections
Under the TGERC 2025 regulation, the minimum system size is 10 kWp and the arrangement applies below 100 kWp
Group net metering is for connections of the same consumer; check that the meters are in the owner's name
Connections with pending arrears are not eligible
See group and virtual net metering in Telangana.
Don't forget the common meter
The water pump and stair lighting are often on a separate common connection, and pumping can be shifted to daytime to use solar. See solar for common loads.
Tenants and fairness
If tenants' bills drop, owners may agree rent adjustments. See solar on a rented house.
Frequently asked questions
Can one solar system serve multiple meters in my house?
Yes, through group net metering for the same consumer's connections, for systems of at least 10 kWp under Telangana's 2025 rules.
Should I put solar on each floor's meter separately?
It works when roof space allows and ownership is clear, but needs more equipment and approvals.
Which meter should a single solar system connect to?
Usually the one with the highest daytime use and sufficient sanctioned load, often the owner's floor.
Do tenant meters need to be in the owner's name for group net metering?
Group net metering is for one consumer's multiple connections, so check the names on each connection with TGSPDCL.
Does the subsidy apply to multi-meter houses?
The household subsidy applies per eligible residential connection under current rules. Check the official portal for your case.
Related guides
Group Net Metering and Virtual Net Metering in Telangana: How They Work (2026)
Sanctioned Load and Solar Capacity in Telangana: What to Check Before You Install
Rooftop Solar on a Rented House in Hyderabad: Options for Tenants and Landlords
Solar for Apartment Common Areas: Lifts, Water Pumps, STP and Clubhouse Loads
Rooftop Solar for PGs and Hostels in Hyderabad: Does It Pay Off?
Rooftop Solar for Independent Houses in Hyderabad: Size, Cost and Roof Planning
Start here: Hyderabad rooftop solar buyer's guide
Plan solar for your building
Arkasri Energy, an end-to-end solar EPC company in Hyderabad, reviews all meters and loads before recommending a design. Read the Hyderabad rooftop solar buyer's guide or book a site assessment.
Written by the Arkasri Energy team, Tellapur, Hyderabad. Reviewed November 2026. Based on TGERC Regulation No. 1 of 2025; confirm procedures with TGSPDCL.
