Short answer: Rooftop solar on an apartment or gated community usually powers the common-area connection: lifts, water pumps, the sewage treatment plant (STP), corridor and street lighting, gym and clubhouse. Loads that run during the day, such as pumps and the STP, benefit most. Night-time lighting is mostly met by the grid through net metering. Lifts and fire pumps must stay on a reliable grid or generator supply; solar reduces the bill but is not emergency backup unless batteries are designed for it.

Why common areas suit solar

In most Hyderabad apartments and gated communities, the common-area meter is a separate service connection billed to the association. Its usage is steady across the year and much of it happens in the daytime, which is when solar generates. The terrace is also shared, so the system can be sized to the common load without dividing roof space between flats.

The Telangana rooftop solar regulation in force since 15 November 2025 also introduced group and virtual net metering for systems below 100 kWp, which can matter for housing societies. Read our full guide to rooftop solar for apartments and gated communities.

Common-area loads and how solar fits

  • Water pumps (borewell, transfer) — When it runs: Often scheduled; can be shifted to daytime; How well solar matches: Very good, especially if pumping is moved to 10 am–3 pm

  • STP blowers and pumps — When it runs: Continuous, day and night; How well solar matches: Good for the daytime share

  • Lifts — When it runs: Throughout the day, peaks morning and evening; How well solar matches: Partial; solar offsets daytime use

  • Corridor, basement and street lights — When it runs: Mostly night; basements may be on all day; How well solar matches: Low for night lighting, good for all-day basement lighting

  • Clubhouse, gym, pool pumps — When it runs: Daytime and evening; How well solar matches: Good for daytime use

  • Security, CCTV, gate automation — When it runs: Round the clock; How well solar matches: Partial

  • EV charging in parking — When it runs: Varies; How well solar matches: Good if daytime charging is encouraged

Practical steps for an RWA

  1. Collect 12 months of common-area bills. Note units per month and sanctioned load on each common connection.

  2. List the loads and their running hours. The facility manager usually knows pump and STP schedules.

  3. Identify loads that can shift to daytime. Water pumping is the easiest win.

  4. Survey the terrace. Water tanks, lift rooms and solar water heaters reduce usable area. See how much roof area solar needs.

  5. Check sanctioned load limits. Solar size is limited by the common connection's sanctioned load. See sanctioned load and solar capacity.

  6. Decide ownership and maintenance. Who cleans panels, monitors output and handles warranty claims.

  7. Compare proposals fairly using the same scope. See how to compare two solar quotations.

  8. Get general body approval with a clear summary of cost, expected savings and responsibilities.

Safety and backup: what solar does not replace

  • Lifts and fire pumps need a dependable supply. An on-grid solar system shuts down during a grid outage for safety, so it does not run lifts in a power cut.

  • DG sets remain the backup in most communities. If solar and a DG set are both connected, the design must prevent unsafe interaction.

  • Batteries can provide backup for selected loads but add cost; see on-grid vs hybrid solar.

Maintenance considerations

  • Safe walkways and a water point on the terrace for cleaning

  • A monitoring login shared with the facility manager and committee

  • A handover file with serial numbers, warranties and the single-line diagram. See plan solar maintenance before the installation

Frequently asked questions

Can solar run apartment lifts?

Solar can offset the electricity lifts use during the day, but an on-grid system switches off in a power cut, so lifts still need the grid or a DG set for backup.

Which apartment loads save the most with solar?

Daytime loads such as water pumps, the STP and clubhouse equipment. Scheduling pumping during sunny hours increases savings.

Is subsidy available for apartment common-area solar?

Central schemes have separate provisions for group housing societies and RWAs. Check the current PM Surya Ghar rules on the official portal before planning around a subsidy.

Who approves solar in a gated community?

Usually the association's managing committee and general body, because the terrace and common connection are shared.

Can solar work with the DG set?

Yes, if the system is designed for it. The installer must ensure the solar inverter and DG set do not interact unsafely.

Related guides

Plan common-area solar with Arkasri

Arkasri Energy designs rooftop solar for apartments and gated communities across Hyderabad, starting with your common-area bills and load schedule. Read our apartment solar guide or book a site assessment.

Written by the Arkasri Energy team, Tellapur, Hyderabad. Reviewed November 2026. Confirm subsidy and net-metering provisions with the official portal and TGSPDCL.