Short answer: Rooftop solar reliably reduces a Hyderabad business's energy charges (units bought from TGSPDCL). It may or may not reduce demand or fixed charges, which depend on your tariff category and either your contracted load or your recorded maximum demand. If your peak demand occurs in the evening, on cloudy days or when a large motor starts, solar may not lower it. Battery storage or load management can target peaks, but needs separate analysis.

Two parts of a business bill

  • Energy charges: per unit consumed; solar reduces these directly

  • Demand or fixed charges: based on contracted load or recorded maximum demand, depending on your category; solar's effect is uncertain

See how to read your bill after solar.

When solar can lower peak demand

  • Your peak occurs reliably around midday on sunny days

  • Peak loads are steady (for example, air-conditioning) rather than sudden

  • The system is large relative to that load

When it usually doesn't

  • Peaks in the evening or night shift

  • Peaks on cloudy days or in the monsoon. See seasonal generation

  • Short spikes from motor starts or compressors

  • Charges based on contracted load rather than recorded demand

Options to target demand

  • Load scheduling: stagger large motors and shift flexible loads

  • Battery storage: discharge at peaks; requires interval data and a business case. See how battery sizing works

  • Review contracted load with TGSPDCL if it is higher than needed. See sanctioned load

What data you need

  • 12 months of bills showing demand and energy components

  • Interval (15-minute) meter data, if available

  • Operating schedule and major equipment

Include this in your tender. See the solar EPC tender checklist.

Frequently asked questions

Does solar reduce demand charges?

Sometimes. It depends on when your peak occurs and how your tariff calculates demand or fixed charges.

Why didn't my demand charge fall after installing solar?

Your peak may occur when solar is low, or charges may be based on contracted load.

Can batteries reduce demand charges?

They can, if sized and controlled to discharge at peaks, but need a separate business case.

Should I count demand savings in my solar payback?

Only if analysis of interval data shows a reliable reduction. Otherwise, count energy savings only.

What data is needed to assess demand savings?

Bills with demand components and, ideally, 15-minute interval meter data.

Running a pharmaceutical or bulk-drug unit? See our solar company service for pharma plants in Telangana — plant load study, roof survey, shutdown-friendly installation and net or gross metering.

Related guides

Get a load analysis

Arkasri Energy, a solar EPC company in Hyderabad, analyses business bills and load data before sizing. See commercial solar, the buyer's guide, or book a project assessment.

Written by the Arkasri Energy team, Tellapur, Hyderabad. Reviewed November 2026. Tariff structures change; check your current tariff order.